Software installation – Manhattan 130288 Drive Enclosure - Manual User Manual
Page 3
3
1. Remove the 4 screws on the bottom of the enclosure (A) and lift off the top (B).
2. Connect the hard drive to the SATA data and power connectors on the
enclosure, then secure it to the enclosure using the included screws (C).
3. Re-assemble the enclosure (D) using the 4 screws in Step 1.
4. Using the included USB cable, connect the enclosure (E) to a USB port on the
computer.
5. Press the Power button (F). Confirm the Power LED (G)
lights.
Your system will automatically detect the new hardware and
complete the setup, confirmed when “USB Mass Storage
Device” displays in the Device Manager folder.
SOFTWARE INSTALLATION
These steps are for the installation of the convenient one-touch backup software.
NOTE: This software doesn’t support Mac operating systems. Some images may
look different on your computer, as your software version may be slightly different
than the one represented here.
1. Load the included software CD. The PC Clone EX setup wizard’s Welcome
screen will display automatically. Click “Install” to continue.
F
E
G