Manhattan 525527 Mini 300N Wireless Adapter - Manual - Manual (Page 23)

23
The main configuration screen has two additional options as indicated by the red
and blue arrows below.
IP Address: This is the IP address which your newly created access point uses.
Normally there is no need to change this value.
Setting Internet Connection Sharing (ICS): To share an existing Internet
connection among the wireless clients, activate this option. (Additional
configuration options will appear on the screen.) If you’re only allowing
local network access, this option should remain disabled.
Shared network: In order to use ICS, your computer must have an active Internet
connection. This can be a wired connection or another wireless connection.
Select the correct network adapter here or, alternatively, let the utility sort
this out for you by activating the “Auto Select Public Network” option.
Click Apply to activate ICS.