Manhattan 525527 Mini 300N Wireless Adapter - Manual - Manual (Page 7)

7
1.2 Connecting to a Wireless Access Point
You have two options for connecting to a wireless access point (AP):
• To take advantage of all the extra features and functions available in the
Manhattan configuration utililty (which you just installed with the driver), follow
the steps below in Section 1.2.1, then skip ahead to the Configuration chapter.
• If you prefer to simply connect to a wireless AP without considering additional
settings, you can proceed to Section 1.2.2 and use the “WLAN AutoConfig”
function (introduced in XP as “Zero Configuration”) that’s integrated into Windows
operating systems.
1.2.1 Using the Manhattan Utility
1. Double-click on the icon in the system tray or right-
click the icon and select “Open configuration utility.”
2. When the Utility screen displays (the General screen should display initially), go
to the “Available Network” tab and double-click on the wireless access point you
want to connect to.