Manhattan 130370 QuickDock Quattro - Manual (Multi) - Manual (Page 2)

Read from / Write to an external drive
A Quick Dock is commonly used simply to work directly on an external hard disk
drive (HDD).
1. Use the included power adapter to
connect the DC Input jack (E) to an AC
outlet.
2. Use the included USB cable to connect
the Dock (F) to your computer.
3. Using the spacers (G) as needed, insert
up to four drives (2.5” or 3.5”) into the
slots in the Dock: Use (A) first, then (B),
then (C) and, finally, (D).
4. Press the On/Off button (H) and make
sure the Power LEDs (I) light. When the
PW (Positioned Well) LED (J) for the
corresponding slot lights, that external
drive should display on your computer,
and you can then read or write directly
to it.
One Touch Backup (OTB) from a PC
The OTB function lets you move selected
files from your PC hard drive to a separate
drive placed in the Dock. The software on
the included CD must be installed before
you use OTB.
Note: This PC-based software is not Mac
compatible.
•
Follow Steps 1-4 above.
•
Press the OTB button (K) on the Dock and follow the on-screen instructions in
the folder (K305BU3OTB) on the enclosed CD. The RW LEDs (L) indicate the external
drives in the corresponding slots are being read or written to.
2
ENGLISH
QuickDock Quattro English
• Click Eject on your computer before removing a drive from the Dock.
• Don’t turn off power to the Dock or remove a drive while any LED is blinking; that is, while any
data transfer is still in progress.
• For specifications, go to manhattan-products.com.
E
A B C
F
D
I K L
G
H
J