MSD 8478 Ford 351W Street Pro-Billet Installation User Manual

MSD For the car

Advertising
background image

Important:

  Read these instructions before attempting the installation.

Parts Included:

1 - Pro-Billet Distributor

1 - Rotor, PN 8467

1 - Distributor Cap, PN 8431

1 - Advance Kit

1 - O-ring Seal

1 - Tube of Gear Lubricant

1 - Parts Bag

Note: An MSD 6, 7, 8 or 10 Series Ignition Control must be used.

Note: The spark plug wire terminals of the Small Diameter Distributors are HEI style terminals. You 

may need to change the terminals and boots of your wires. MSD offers a kit, PN 8850, that 

comes with nine boots and terminals.

TIMING FUNCTIONS

Before continuing with the installation, here are a few definitions you should be aware of:

Initial Timing:    This  is  the  base  timing  (also  referred  to  as  idle  timing)  of  the  engine  before  the 

centrifugal advance begins.

Centrifugal Advance:  The centrifugal (or mechanical) advance mechanism is made up of weights, 

springs, advance cams, and an advance stop bushing.  The amount of centrifugal advance that your 

distributor is capable of is determined by the stop bushing.  If you ever wish to lock out the centrifugal 

advance, refer to the centrifugal advance section. 

   

Total Timing:    This  is  the  total  of  the  initial  timing  plus  the  centrifugal  advance  added  together.  

Example:  10°  Initial + 25° centrifugal  =  35°  Total Timing. (When checking Total timing, disconnect 

and plug the vacuum advance.)

Vacuum Advance: The vacuum advance will advance the timing up to 10° during partial throttle 

driving (with 15 lbs. of vacuum). The vacuum line should be routed to a ported vacuum outlet above 

the throttle plates.

M S D  

•   W W W . M S D P E R F O R M A N C E . C O M   •   ( 9 1 5 )   8 5 7 - 5 2 0 0   •   F A X   ( 9 1 5 )   8 5 7 - 3 3 4 4

ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered

in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product

will help if there is ever a warranty issue with your product and helps the MSD R&D team create

new products that you ask for! Go to www.msdperformance.com/registration.

MSD Pro-Billet Small Diameter

Street Ford V8 Distributor

PN 8477; 351C-460, PN 8478; 351W

PN 8479; 289/302

Advertising