MSD 6013 Ignition_Timing Control for Late HEMI Mounting template - Manual

PN 6013, PN 6011 and PN 11200
MOUNTING TEMPLATE
R
3.93”
4.40”
5.77”
M S D I G N I T I O N • w w w . m s d i g n i t i o n . c o m • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • FA X ( 9 1 5 ) 8 5 7 - 3 3 4 4
© 2009 Autotronic Controls Corporation
FRM28824 Revised 04/09 Printed in U.S.A.
Before mounting, install the
supplied mounting pads.
CAUTION: Due to some printer settings, it is recommended to compare the document to the actual
part dimensions before drilling holes! If the printed document does not match the actual
part dimensions, correct the printer scaling settings and print again.