Naxa NF-519 - Manual (Page 10)

Page 9
1 ON and OFF
After install the unit and connect it to the power socket, then the unit will turn
on. If you want to turn off the unit you should press STANDBY button. Also
press STANDBY button again to turn on the unit.
2 MAIN MENU OPERATION
Note:
1. Insert the SD/MMC/MS card and USB contains picture and music files in it before turn on the
unit, when turn on the unit, it will automatically play the pictures and music files in the USB.
Moreover, it only play the files in the USB continuously. But when connect the AC adapter, turn
on the unit first, then insert the CARD/USB in the unit, the unit will only play the files in the NOR
FLASH memory continuously if the memory contains picture or music files. If you want to play
files in other card, press MENU button till to enter card select interface and select the card as
desired, then press ENTER button to confirm. The unit will start play the files in the card you
select.
2. If there is no card/USB in the unit, or NOR FLASH of unit contains no files, the Slideshow,
Video, Photo and Music have no function.
The media formats which unit supports consists of:
-Photo: JPG; -Music: MP3/WMA; -Movie: DAT/MPEG/AVI.
2.1 Slide show
Insert card(SD/MMC/MS)or USB into the card/USB slot, then select the SLIDESHOW item in
the main menu, press ENTER button to confirm. Then the unit will play the photo and music
stored in one device simultaneously. And the formats supported are JPG and MP3/WMA. (Or
you can press P&M button on the remote control to enter this mode directly)
2.2 Video
-Press left or right button to select VIDEO icon, then press ENTER button to enter the below
page.(Or you can press VIDEO button on the remote control to enter video file playback
directly)
-In the VIDEO item, it only supports the movie playing and the formats are DAT/MPEG/AVI.
OPERATION
Turn on the unit and press MENU button twice, then
the screen will display main menu page (shown as left
picture).
There are five functions consist of Slideshow,
Video, Photo, Music and Calendar. You can
press LEFT/RIGHT navigation button to select
desired function and press ENTER button to enter.