Battery installation, Using control preparation, Prepare for remote control – Naxa NF-519 User Manual

Page 6

Advertising
background image

Page 5

Battery installation

Insert the battery according to the
pictures as above while observing
the correct (+) and (-) polarities.

Service life of batteries
●The batteries normally last for
about one year although it

depends on how often the

remote control is used.
●If the remote control fails to work
even when it is operated near the

player, replace the batteries.
●Use one size CR2025 type battery

Using control preparation

PREPARE FOR REMOTE CONTROL

BATTERY USAGE AND HANDING:
●Do not use rechargeable (Ni-Cd) batteries.
●Do not attempt to recharge.
●Do not place the battery near to heat or
expose to sunshine, and never throw the

battery into the fire.
●Do not drop, step on or otherwise impact
the remote control. This may damage the parts or lead
to malfunction.
●Keep battery away from children and pets.
●Remove the battery when the remote control is not in
use.

1. Remove the protective plastic tab before

operating the remote control.

2. Point the remote control from no more than 4 m from
the player and within about 60

°of the front of the

player(refer to the picture at right)

NOTE:
-The operating distance may vary according to the
brightness of the room.
-Do not point bright lights at remote control sensor.
-Do not place objects between the remote control and
the remote control sensor.
-Do not use this remote control while simultaneously
operating the remote control of any other equipment.

Advertising