Troubleshooting – Naxa NF-519 User Manual

Page 17

Advertising
background image

Page 16

Before requesting service for this player, check the chart below for a possible cause of the

problem you are experiencing. Some simple checks or an adjustment on your part may

eliminate the problem and restore proper operation.

TROUBLESHOOTING

Symptom

Remedy

No power.

Insert the AC adaptor securely into the power outlet.

The player is automatically
set to the standby mode.

Disconnect the power source and connect them again.

No picture.

Ensure that the equipment is connected properly.

-No sound.
-Distorted sound.

-Ensure that the equipment is connected properly.
-Ensure that the input setting for the TV and stereo
system are correct.
-Adjust the master volume to a suitable volume by press
VOL button.

Picture is distorted during
rapid
Advance or rapid reverse.

The picture will be somewhat distorted at times: this is
normal.

No operations can be
performed with the remote
control unit.

Check the battery is installed with the correct polarities.
The battery is exhausted: replace it with new one.
- Point remote control at the remote control sensor and
operate.
- Operate the remote control unit at a distance of no
more than 4m from the remote control sensor.
- Remove the obstacles between the remote control and
remote control sensor.

No key operations (by the
main unit and/or the remote
control unit) is effective.

Press STANDBY to set the player to the standby mode
and then back to ON. Alternatively, press STANDBY to
set the
Player to the standby mode, disconnect the power
adaptor and then reconnect it. (The play may not be
operating properly due to lighting, static electricity or
some other external factor.

Advertising