Naxa NCD-708 - Manual (Page 10)

Hollow
Bulge
ATTACHING THE FRONT PANEL
Installation
-8-
1). First, insert the left side of the front panel into the main unit(SEE ).
(Note: the “Hollow ” point on the front panel must be attached into the “Bulge”
point of the unit . )
2). Gently push the right-down hand side of the front panel until you feel a “ Click” .
(SEE )
Precautions
Do not touch the contacts on the front panel or the unit body, since this may
result in poor electrical contact. If dirt or dust accumulates on the contacts ,
wipe them with a clean, dry cloth .
1
2
1
2