Naxa NCD-708 - Manual (Page 23)

-21-
Touch Screen Operation
Automatic Memory Storing &
Program Scanning
In Radio Mode, touch and keep (for more
than 2 ’ S) the screen of “ APS ” range to
active automatic station storage.
The radio searches within the current
frequency band, e.g. FM1, for the stron-
ger signal level until the search cycle
has finished . The six strongest stations
are then allocated to the corresponding
storage locations .
Then the station of the first storage
location is set .
Automatic Preset Setup
Scan Function
In Radio mode, briefly touch the “APS”
section on the touch screen , the radio
briefly plays all the preset stations of the
frequency band .
>Keep the desired memory key pressed
in until the station is heard again after
a brief interruption .
- Retrieve a preset station
Touch the 1-6 ranges briefly to retrieve
a station which had been stored in the
memory in advance the chose number
is shown on display .
DX DX ST ST USER USER SWF SWF
FM1 FM1
107.00 107.00
MHZ MHZ
55
CH CH
1 1
2 2
3 3
4 4
5 5
6 6
87.50 87.50
90.00 90.00
98.00 98.00
86.60 86.60
107.00 107.00
106.00 106.00