Naxa NPB-256 - Manual (Page 4)

7 6
REPEAT ALL TRACKS
RANDOM PLAY
INTRODUCTION PLAY
MP3-CD PLAYBACK
LOCATE A TRACK OR ALBUM AND SEARCH FOR A SPECIFIC POINT TO PLAY
REPEAT A SINGLE TRACK
To repeat all tracks, press MODE button twice in play mode,
The player will repeat all tracks until you press STOP button.
Random play is that tracks on the disc are played by the player at random. Press MODE
button three times to enter this mode during play, "RAN" shows in the LCD. Press
Play/Pause button or SKIP buttons to begin Random playback. Tracks on the disc will be
selected at random for playback and the player stops automatically after all tracks are
played. Press MODE button once more to exit random.
Introduction play is that the first ten seconds of each track are played in a sequential order.
Press MODE button four times to enter this mode during play, "INTRO" shows in the LCD.
Press Play/Pause button to begin Introduction play from Track NO.1. Press SKIP up button
to begin INTRO playback from the track immediately after the current track and SKIP down
button to begin INTRO playback from the
track. Press STOP button in Intro
playback to exit Introduction play mode and press play/pause button to resume normal
music play.
This player is capable of MP3-CDs. It takes longer time for this player to read an MP3-CD
than it does CD-DA. Wait patiently while it is reading.
After an MP3-CD is successfully read, the total number of albums and tracks show on the
LCD. And a second later, playback begins from the first track of the first album with the Mp3
icon.
1. Press once the SKIP/SEARCH up button in music play to skip to the next track. To skip
to a specific track ahead, press this button several times.
2. Press once the SKIP/SEARCH down button in music play to skip to the last track. To
skip to a specific track at back, press this button several times.
3. Press +10/ALBUM button once in play to skip to the track 10 tracks ahead, twice to skip
to the track 20 tracks ahead. You can reach the last track of the current album using this
button.
4. Hold the SKIP/SEARCH up button in music play to search forward at quick rate for a
specific point to play.
5. Hold the SKIP/SEARCH down button in music play to search backward at quick rate for
a specific point to play.
6. Hold the +10/ALBUM button, the album number will flash; press the Skip/Search button
to select the desired album, press and hold the ALBUM button again for 2 seconds to
confirm this album selection, the track number flickers for your input; select the desired
track of the chosen album using the SKIP/SEARCH buttons. Finally, press PLAY/PAUSE
button again to begin playing this chosen track.
To repeat a preferred track in playback, press MODE button once,
Then select the preferred track using SKIP/SERCH buttons. The
player will repeat the chosen track until you press STOP button.
the LCD shows the icon for all
tracks repeat.
previous
the LCD shows the icon
for single track repeat.
REPEAT ALL TRACKS
REPEAT AN ALBUM
RANDOM PLAY
INTRODUCTION PLAY
To repeat all tracks, press MODE button twice in play mode,
The player will repeat all tracks until you press STOP button.
To repeat a preferred album in playback, press MODE button thrice, the LCD shows the
icon for album repeat. Then select the preferred track using the +10/Album and Skip
buttons together. The player will repeat the chosen album until you press STOP button.
Random play is that tracks on the disc are played by the player at random. Press MODE
button four times to enter this mode during play, "RAN" shows in the LCD. Press
Play/Pause button or SKIP buttons to begin Random playback. Tracks on the disc will be
selected at random for playback and the player stops automatically after all tracks are
played. Press MODE button once more to exit random and return to normal playback from
the track it's reached.
Introduction play is that the first ten seconds of each track are played in a sequential order.
Press MODE button five times to enter this mode during play, "INTRO" shows in the LCD.
Press Play/Pause button to begin Introduction play from Track NO.1. Press SKIP up button
to begin INTRO playback from the track immediately after the current track and SKIP down
button to begin INTRO playback from the previous track. Press Play/Pause button again in
Intro playback to exit Introduction play mode and normal music play resumes.
the LCD shows the icon for all
tracks repeat.
Programmed play is that tracks on the disc can be edited for playback in a preferred order
with the use of PROGRAM button.
In MP3 stop mode, press EQ/PROGRAM button once, "PROG" shows in the LCD with a
flickering album number and the program sequence indication "P-01"; select the album
number to be programmed using SKIP/SEARCH buttons or +10/ALBUM button, and press
PROGRAM button again to store; the track number flickers waiting for your selection.
Choose the desired track with SKIP/SEARCH buttons or +10/ALBUM button. Press
PROGRAM button again to confirm the first programming and advance to the next
programming step. The program sequence indication changes to "P-02" waiting for your
next input.
Repeat the steps above to program more tracks. A maximum of 99 tracks can be
programmed in memory in a preferred order.
Press PLAY/PAUSE button to begin programmed play in the preferred order after you are
done with programming. The player stops automatically after all programmed tracks are
played.
You may press STOP button to terminate programmed playback. In program stop mode,
press STOP button again to clear the programming; press PLAY/PAUSE button to begin
the programmed playback with the programming order identical with the previous one done.
Prepare the player for external memory media operation.
Insert a USB data traveller into the USB port OR insert a SD/MMC card into the card slot;
Slide FUNCTION switch to USB/AUX mode and playback will start from the first track.
You may press the USB/CARD button to switch between USB and SD/MMC modes.
PROGRAMMED PLAY
EXTERNAL MEMORY MEDIA OPERATION (USB, SD/MMC)
NOTE: