Naxa NPB-256 User Manual
Page 5
9
8
VARIOUS PLAY MODES
SKIPPING TRACKS AND SEARCHING BETWEEN TRACKS
REPEAT MODES
RANDOM PLAY
INTROSCAN PLAY
Press the SKIP UP button once to skip the current track and play the next track, press this
button continuously to go to corresponding tracks ahead.
Press the SKIP DOWN button once to skip to the last track, press this button continuously
to go back to previous tracks.
Press the MODE button once in play mode to repeat the current track; the LCD shows the
icon for single track repeat.
Press the button for the twice time to repeat tracks stored on this storage media
(USB/MMC card) as a whole; the LCD shows the icon for all tracks repeat.
Press the button thrice to repeat tracks in current directory as a whole. The LCD shows the
icon for album repeat.
Press MODE button for the fourth time in play to activate random playback; the player will
pick up tracks in a random sequence for playback after PLAY/PAUSE is pressed. You may
press this button once again to exit random play mode and return to normal playback.
Press MODE button for the fifth time in play mode to activate introscan playback
immediately; the player will pick up tracks for playback of the first 10 seconds of each track
in a sequential order after PLAY/PAUSE button is pressed. You may press PLAY/PAUSE
button once again to exit introscan play mode and return to normal playback from the track
it's arrived at.
Press and hold the +10/ALBUM button for 2 seconds during play, the album number
flashes; select the desired album using the SKIP/SEARCH buttons; Press and hold the
ALBUM button again for 2 seconds to confirm this album selection, the track number
flickers for your input; select the desired track of the chosen album using the
SKIP/SEARCH buttons. Finally, press PLAY/PAUSE button again to begin playing this
chosen track.
PROGRAMMED PLAY
Take the USB programmed play as an example:
In USB, SD/MMC card mode, there is also a programmed play function. A maximum of 99
tracks can be programmed.
Discs can be edited for playback in a preferred order with the use of the PROGRAM button.
In stop mode, press the PROGRAM button once, "PROG USB" shows in the LCD with a
flickering album number and the program sequence indication "P-01"; select the album
number to be programmed using the SKIP/SEARCH or +10/ALBUM buttons, and press
PROGRAM again to store; the track number flickers waiting for your selection. Choose the
desired track with SKIP/SEARCH buttons or +10/ALBUM button. Press PROGRAM button
again to confirm the first programming and advance to the next programming step. The
program sequence indication changes to "P-02" waiting for your next input.
Hold the SKIP/SEARCH up button in music play to search forward at quick rate for a
specific point to play.
Hold the SKIP/SEARCH down button in music play to search backward at quick rate for a
specific point to play.
Repeat the steps above to program more tracks. A maximum of 99 tracks can be
programmed in memory in a preferred order.
Press the PLAY/PAUSE button to begin programmed play in the preferred order after you
are done with programming. The player stops automatically after all programmed tracks are
played.
You may press STOP to terminate programmed playback. In program stop mode, press
STOP again to clear the programming; press PLAY/PAUSE to begin the programmed
playback with the programming order identical with the previous one done.
Your player can be used as a power amplifier to playback the programs from portable radio,
TV set or MP3 player or whatever provide this appliance is so designed that audio signal
may be produced through a LINE-OUT jack or the like. Observe the following steps to
connect the player to another appliance:
1. Power the player on using the supplied AC Power Cord.
2. Slide the FUNCTION button to USB/AUX position.
3. Connect the appliance into the player's AUX in jack with LINE- OUT cable of the
appliance.
4. Power on the appliance and begin play.
At this time you will be able to hear the sound produced from the programs the connected
appliance is broadcasting.
This player is subject to any change in electronics and cosmetics without advance notice or
taking any responsibilities as we follow a policy of constant development and improvement
on this product. We are sorry if this will cause or has caused any inconvenience to you.
The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
When the mains plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable. To be completely disconnected the
power input, the mains plug of the apparatus or the appliance coupler shall be
disconnected from the mains completely.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Minimum distances 2.0cm around the apparatus for sufficient ventilation. The ventilation
should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc.
The use of apparatus is in tropical and/or moderate climates.
Attention should be drawn to the environmental aspects of battery disposal.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
The marking plate is located at the back of the apparatus.
AUXILIARY IN
IMPORTANT NOTES:
IMPORTANT SAFETY INSTRUCTIONS