Naxa NCA-604 - Manual (Page 11)

Radio Operation
1. BAND button
To switch between F1(FM1),F2(FM2),F3(FM3),A1(AM1) and A2(AM2).
2. |<< & >>| or < & > buttons
In standby mode or after no manually searching operation for a while, briefly
press one of them to automatically search down or up for an available station and
listen to it.
To manually search down or up for a desired station and listen to it, long press
one of them to enter MANUAL mode, then briefly press one of them step by step.
3. SCAN button
To scan for all available stations and select one of its to listen.
4. APS button
To scan for every preset station of FM or AM, briefly press the APS button;
To preset stations for every memory bank of FM or AM, long press the APS button.
5. 1~6 buttons
To listen to a preset station, first switch on a desired band, then press one of
the 1~6 buttons to find it and listen to it.
To preset current station on a memory bank, long press one of the 1~6 buttons.
6. ST/MO button
In FM band, press ST/MO button to switch on STEREO or MONO mode.
7. LOC/DX button
To tune local stations, press LOC/DX button to display LOCAL, then tune them
again.
To tune distance stations, press LOC/DX button to display DX , then tune them
again.
-10-