Naxa NCA-604 - Manual (Page 15)

AUX IN Operation
1. Use an audio cable to connect the car audio system and the external audio system
through the AUX IN jack on the control panel of the car audio system and the Audio
Out jack of the external audio system.
2. Play the external audio system, and use the MODE button to enter AUX IN mode for
the car audio system.
* In AUX IN mode, the external audio system uses the car audio system as an amplifier.
3. In AUX IN mode, you can use SEL, VOL+, VOL-, VOL(knob), MUTE, EQ and LOUD
buttons to adjust sound.
Ground
Right
Left
-14-