Naxa NSM-436 - Manual (Page 14)

13
PROGRAM PLAY OPERATION
Program a sequence of up to 20 tracks to be played .
IN CD disc mode
1. Press
STOP to make sure playback is stopped .
2. Press PROGRAM PLAY MODE button to enter program mode .The LCD screen will display
『 MEMORY』, 『P01』and flashing 『00』.
3. While 『00』is blinking , press FM.ST or BAND to select a track number ,and then press
PROGRAM PLAY MODE button to store it in memory . The LCD will display 『P02』.
4. Repeat the previous step untill you have selected up to 20 tracks . Press ENTER ► to start
Program play .
IN MP3 disc or USB/SD CARD mode
1. Press
STOP to make sure playback is stopped .
2. Press PROGRAM PLAY MODE button to enter program mode .The LCD screen will display
『 MEMORY』, 『P01』and flashing 『F00』.
3. While 『F00』is blinking , press FM.ST or BAND to select a folder , press PROGRAM PLAY
MODE to confirm . then T 00 will blinking , press FM.ST or BAND to select a track number .
then press PROGRAM PLAY MODE button to store it in memory .
4. Repeat the previous step untill you have selected up to 99 tracks . Press ENTER ► to start
Program play .
IMPORTANT NOTE :
Press FM.ST or BAND during Program play will display the programmed track number . Press
STOP to clear the program list . The program list also be lost if you open the CD door or if the unit is
unplugged .
CLOCK ADJUSTMENT
1. Press the STANDBY button to switch the unit to standby mode .
2. Hold
the PROGRAM PLAY MODE button for 2 seconds . The LCD will flash the 12 or 24 H, press
FM.ST or BAND to select the 12 H or 24 H display mode . Press PROGRAM PLAY MODE
button to confirm .
3. The hour digit will flash , press FM.ST or BAND to set the hour . Press PROGRAM PLAY
MODE button to confirm .
4. The minute digtit will flash , press FM.ST or BAND to set the minute . Press PROGRAM PLAY
MODE button to confirm .
Display Function
During “on”mode , Hold PROGRAM PLAY MODE button on the unit or remote control for 2-3 seconds
to show the current clock . It will show 4-5 seconds .