Ohaus TS Series Electronic Balance - Manual (Page 56)

© Ohaus Corporation 1991, 1999, all rights reserved.
Leveling Kit Accessory
P/N 77327-00
For PRECISION Standard
Electronic Balances
Installation Instructions
UNPACKING
The Leveling Kit includes the following components:
1 FCC label 1 level assembly with
2 lockwashers 3 set screws installed
2 phillips screws 1 brass foot
4 leveling feet (2 pairs)
P/N 77328-00 R0699
Ohaus Corporation
29 Hanover Road,
Florham Park, NJ 07932, USA
Tel: (973) 377-9000,
Fax: (973) 593-0359
With offices in England, Germany, France, Spain, Italy, Poland, Mexico, Japan,
Korea and China.
Ohaus Corporation
29 Hanover Road
Florham Park NJ
07932-0900
16. Replace the cover and fasten with the
three phillips screws that were re-
moved in step 9.
17. Replace the pan support and pan.
18. Place the balance in the location
where it will be used and verify it is
level. If minor adjustment is needed, use the leveling feet.
19. Recalibrate the balance as explained in the instruction manual supplied with the
balance.