Print numeric data only – Ohaus TS Series Electronic Balance User Manual
Page 69
12
Print Numeric Data Only
Print Numeric Data Only
Print Numeric Data Only
Print Numeric Data Only
Print Numeric Data Only
This submenu is used to select numeric
data only, or full display data for RS232
output. Set this feature ON to output nu-
meric display data only, or OFF to output
full display data as follows:
1.
Access the Nu submenu to display
the current status.
2.
Press
to change the status.
Press
to accept the displayed
status.
When
is released, NU will be dis-
played again and the Print menu will be
returned.
When
is released, STABLE will be
displayed again and the Print menu will be
returned.
End
End
End
End
End
You must use END to exit the Print menu.
Changes you make in the Print menu
Changes you make in the Print menu
Changes you make in the Print menu
Changes you make in the Print menu
Changes you make in the Print menu
are only stored in memory if you use
are only stored in memory if you use
are only stored in memory if you use
are only stored in memory if you use
are only stored in memory if you use
End.
End.
End.
End.
End.
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
OFF
OFF
OFF
OFF
OFF
MODE
MODE
MODE
MODE
MODE
To exit the Print menu and store your
selections, press
when END is dis-
played. The balance will be returned to
normal weighing operations.
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE