Operation – Ohaus CATAPULT 1000 SCALES Manual multi User Manual
Page 6
EN-4
Catapult 1000 Series Scales
2.3.2 Battery Installation (Optional)
Open the battery cover on the bottom of the scale and install three “C” size (LR14)
alkaline or rechargeable batteries into the compartment. Orient the batteries as
shown on the inside of the compartment. Close the battery cover.
NOTE: Batteries are not included.
Figure 2-2. Battery Installation
.
CAUTION
:
Do not dispose of used batteries in domestic waste. Follow the
proper disposal or recycling requirements in accordance with local laws
and regulations.
3. OPERATION
3.1 Turning Scale On/Off
To turn the scale on, press the ON/ZERO
Off
button. The scale performs a display
test, momentarily displays the model/software version, and then enters the active
weighing mode.
To turn the scale off, press and hold ON/ZERO
Off
button until OFF is displayed.
3.2 Zero Operation
By pressing the
ON/ZERO
Off
button, the scale display returns to zero. When adding
additional mass, the
ON/ZERO
Off
Button may be used repeatedly until the full
capacity of the scale is reached. When a container is used, the
ON/ZERO
Off
button
may be used to simulate a Tare function. Additional mass may then be added as a