Navigator, Balance calibration guide – Ohaus NAVIGATOR NVT Calibration Guide User Manual
Page 2
Advertising
Navigator
Balance
Calibration Guide
Navigator
Calibration Guide
ii
Ohaus Corporation www.ohaus.com
LINEARITY CALIBRATION
Linearity calibration uses three calibration points; zero, mid-scale and full scale.
Before beginning calibration, be sure the menu Lock Switch is off.
Note:
Be careful not to touch the scale or the table while calibration is in progress, as it will
cause the process to fail.
5
(Release button)
N
1
Y
1
Y
1
(On some models, no need to press Yes)
(Place mass on platform)
Y
1
(Place mass on platform)
Y
1
(Remove mass)
*83033982*
P/N 83033982
Advertising