Ohaus CARAT PLUS PRECISION JEWELRY BALANCES Density Determination Kit Manual - Manual (Page 2)

2 2
UNPACKING
Carefully unpack the Density Determination Kit.
Your package should contain the following items as shown in Figure 1:
• Bracket
• Support
• Equalizing Washer
• Weigh Below Hook
• Bag containing Spacer, Screw and Cone Adapter
• This Instruction sheet.
Bracket Weigh Below Hook Equalizing Washer
Support
Figure 1. Kit Components
MATERIALS REQUIRED
Before you can make density determinations, you will require a standard laboratory
250 ml beaker which is 2.625"/6.6 cm in diameter and a precision thermometer
graduated from 10°C to 30°C. These items are not supplied with the kit.
Precision Thermometer
10°C to 30°C
250 ml Beaker
Figure 2. Materials Required. ( Not supplied)
Screw Spacer
Cone Adapter
density kit.pmd 8/9/2005, 1:12 PM 2