Soft dB Opus Suite Intensity Module - Manual (Page 8)

6
4.1 Measure Controls
RUN/PAUSE/CONTINUE
When the user clicks this button, the measurement process is launched. The RUN
button then automatically becomes the PAUSE button.
When the user clicks this button, the measurement process is suspended. The PAUSE
button then automatically becomes the CONTINUE button
STOP/SAVE
When the user clicks this button, the measurement stops. The STOP button then
becomes the SAVE button.
When the user clicks this button, the active measurement is saved. The SAVE button is
then disabled until another measurement is complete.
4.2 Measure Info
Measure Info
This indicator displays the elapsed time and the buffer status bar.
This indicator displays the maximum measurement length. After the specified
duration, the measurement is automatically stopped. However, the user can stop the
measurement manually by clicking the STOP button. To change this value click on this
indicator to display a numeric keyboard.
This indicator displays the first frequency that is available on the spectrum. Clicking on
this indicator launches the block length interface.
This control allows switching the display mode between Instantaneous values and
time-averaged values during a measurement. When the measurement stops, the time-
averaged mode is automatically selected and the instant mode is unavailable.
This control allows writing a comment about the measurement. Any text written in this
filed will be included in the next measurement. To modify the comment of a previous
measurement, use the Measure Info Comment field. To modify the comment, click on
the text field to display a keyboard.