Spicer SERVICE CATALOG - Manual (Page 10)

8
© Dana Spicer
Data Sheet
Standard Variant 9.01
Short Coupled Driveshaft
Sleeve-Muff-Design
Recommended connection
Companion flanges
- XS : Cross serration according to ISO 8667
Driveshaft flange yokes
- XS : Cross serration according to ISO 12667
Please note:
All values given are nominal. Exact information
should only be obtained from drawing.
Design
All applications must be approved by Dana. Specifications and/or design are subject to change without notice or obligation.
K
L
Z
M
β
M
A
Compact 2030 2035 2040 2045 2055 2060 2065
Funktional limit torque T cs kNm 6,5 10,0 14,0 17,0 25,0 30,0 35,0
Connection - KV 120 KV 150 KV 150 KV 180 KV 180 KV180 KV 180
Optional KV 150 KV 120 KV 180 KV 150
Flange-ø A mm 120 120 155 180 180 180 180
Max. Joint angle ß ° 25 25 25 25 25 25 25
Max. Rotation-ø K mm 127 144 160 174 178 196 206
Standout M mm 63,5 75 82 87 92 100 105
Compressed length/
L z max./ L a mm/mm 436/110 510/110 505/110 541/110 571/110 590/110 631/110
Sliding movement
Compressed length/
L
z max./
L
a
mm/mm 371/45 470/70 465/70 501/70 541/70 550/70 591/70
Sliding movement
Max. Weight G W max. kg 15,2 20,5 23,5 31,4 39,7 46,0 61,1
Min. Weight G W min. mm 13,5 19,3 21,7 29,4 36,8 43,6 57,9