Spicer SERVICE CATALOG - Manual (Page 13)

11
© Dana Spicer
Data Sheet
Standard Variant 0.08
Driveshaft
with length compensation and centered double joint on one side
100
50
0
0 10 20 30 40
To
rq
ue
%
Deflection angle β [ °]
Recommended connection
Companion flanges
- DIN:
according to ISO 7646
- SAE: according to ISO 7647
- XS : Cross serration according to ISO 8667
Driveshaft flange yokes
- XS : Cross serration according to ISO 12667
Please note:
All values given are nominal. Exact information
should only be obtained from drawing.
Attention:
Not all DIN/SAE-flange-connection can transmit
the function-limit-torque of the corresponding
driveshaft size by friction.
Design
All applications must be approved by Dana. Specifications and/or design are subject to change without notice or obligation.
β
1
S
D
K
M
1
Z
M
2
L z
A
β
Transmission capacity dependent on deflection
angle for a centred double joint
Compact 687.30 687.35 687.45
Funktional limit torque T cs kNm 3,9 6,5 7,4 8,3 17,0
Connection - DIN 120 DIN 150 DIN 150 KV 150 DIN 180
Flange-ø A mm 120 150 150 150 180
Max. Joint angle ß ° 42 42 42
Max. Joint angle ß 1 ° 25 35 25 25
Max. Rotation-ø K mm 140 150 180
Standout M 1 mm 72 78 95 75 90
Standout M 2 mm 72 70 75 78 95
Compressed length L
z min.
mm 600 604 766 749 725
Sliding movement L a mm 110 190 110
Standout Z mm 102 115 140
Tube D x S mm 90 x 3 85 x 5 120 x 4
Weight of 1m-shaft G
W
kg 24,4 kg 25,7 kg 35,0 36,0 55,2
Weight of 1m-tube G
R
kg 6,4 9,9 11,4