Spicer SERVICE CATALOG - Manual (Page 11)

9
© Dana Spicer
Data Sheet
Standard Variant 9.03
Short Coupled Driveshaft
Sleeve-Yoke-Design
Recommended connection
Companion flanges
- XS : Cross serration according to ISO 8667
Driveshaft flange yokes
- XS : Cross serration according to ISO 12667
Please note:
All values given are nominal. Exact information
should only be obtained from drawing.
Design
β
K
M M
L
Z
A
All applications must be approved by Dana. Specifications and/or design are subject to change without notice or obligation.
Compact 2030 2035 2040 2045 2055 2065
Funktional limit torque T
cs
kNm 6,5 10,0 14,0 17,0 25,0 35,0
Connection - KV 120 KV 150 KV 150 KV 180 KV180 KV 180
Optional KV 150 KV 120 KV 180 KV 150
Flange-ø A mm 120 155 155 180 180 180
Max. Joint angle ß ° 25 25 25 25 25 25
Max. Rotation-ø K mm 127 144 160 174 178 206
Standout M mm 63,5 75 82 87 92 105
Compressed length/
L z max./ L a mm/mm 380/95 444/110 466/110 491/110 517/110 574/110
Sliding movement
Compressed length/
L
z max./
L
a
mm/mm 321/36 384/50 411/55 430/50 457/50 514/50
Sliding movement
Max. Weight G W max. kg 13,9 19,2 23,1 30,2 38,2 54,7
Min. Weight G W min. kg 12,0 17,4 21,0 27,3 34,9 49,9