Velleman VMB8IR - Manual (Page 3)

VMB8IR IR receiver module user manual – version 1 3
DESCRIPTION
This IR receiver module allows up to 40 remote commands. The first 8 channels also feature an indication LED.
Compatible transmitters are the universal remote controls from the Logitech Harmony series (Velbus codes can
be downloaded from the Logitech website).
CHARACTERISTICS
Use:
• IR remote control for your Velbus installation
• up to 40 channels
• 8 channels feature an indication LED
LED indications:
• status indication for the first 8 channels
• IR reception
• power
voltage present
• data reception and transfer over the Velbus
Control:
• 40 channels to be controlled through a universal remote control from the Logitech Harmony series
• local control for identification and/or addressing through the Velbuslink software
Configuration:
• only configurable via the Velbus PC interface (VMB1USB, VMB1RS or VMBRSUSB) and the Velbuslink
software
• addressing through software (up to 250 addresses)
• 32 out of the 40 channels reproduce the pushbutton functions from your Velbus installation
• adjustable reaction delay per channel between 0, 1, 2 and 3 seconds
• suppression possibility for every channel
• learned pushbuttons are saved in case of a power failure
• Logitech Harmony codes to be configured through the Logitech configuration software
IR receiver:
• IR modulation system: RECS80 with pulse position
• transmission/receiving range: ± 8m
Module power supply:
• required power voltage: 12...18VDC
• consumption in stand-by: 20mA
• max. consumption: 35mA
Dimensions:
• W x H x D: 22 x 46 x 43mm