Velleman VMB8IR User Manual
Page 6
6
VMB8IR IR receiver module user manual – version 1
BUILDING IN THE MODULE
Choose an installation spot which will be easily accessible for the IR waves.
The IR receiver module can be built-in in combination with two blank frames VMBFBI and a Velbus cover plate
VMBFDG or VMBFLG. Push the modules from the back into the cover plate.
The module must be pushed into the build-in frame from the front.
It is also possible to use a 2- or 3-module wide frame with cover plate from the BTicino Living series. The module
must be pushed into the build-in frame from the front.
It is also possible to use a 2- or 3-module wide frame with cover plate from the BTicino Light or Light Tech series.
The module must be pushed into the build-in frame from the front.
To build the sensor in into a hollow wall, use a hollow wall pattress.