5hardware installation – Velleman К8048 User Manual
Page 6
Advertising
PIC programmer board
4
5
Hardware installation
·
Connect your PC with the K8048 via a 9-pin serial cable.
Use a free serial port and ensure that the installed software cannot cause an interrupt conflict
on this port when working with the K8048 e.g. executive programs for other programmers,
measuring devices, PDA's, etc...
·
Place selector (SW5) in the central position (standby).
·
Connect a non-regulated 12 to 15V DC adapter of min. 300mA with the K8048 via SK1
(compatible Velleman adapters:
PS1205
/
PS1208
/
PS1508
(230Vac) or
PS1208USA
(115Vac))
·
The 'POWER' LED (LD7) should now be the only one to light, indicating that the power supply
of the K8048 is OK.
Advertising