Velleman projects K6727 Assembly instructions User Manual
Page 4
Advertising
![background image](/manuals/259269/4/background.png)
4
Assembly hints
1.3 Soldering Hints :
1- Mount the component against the PCB surface and carefully solder the leads
2- Make sure the solder joints are cone-shaped and shiny
3- Trim excess leads as close as possible to the solder joint
REMOVE THEM FROM THE TAPE ONE AT A TIME !
AXIAL COMPONENTS ARE TAPED IN THE CORRECT
MOUNTING SEQUENCE !
Velleman hereby certifies that the device K6727 meets the essential requirements and all other relevant stipulations
of directive 1999/5/EG and 1995/5/EC.
For the complete conformity declaration check out :http://www.velleman.be/downloads/doC/CE_K6727.pdf
Advertising