Velleman projects K6727 Assembly instructions - Manual (Page 9)

9
Operating mode
By using the jumpers JM1 or JT1, channel 1 of the receiver can be set up for two output possibilities:
1. Output channel 1 is on while the transmitter is pressed (MOMENT), this is mostly used for operating a door lock,
garage door, etc.
JM1
2. Output channel 1 switches (on/off) every time the transmitter is pressed (TOGGLE), this setting is mostly used for
switching alarms in and out, for operating central door locking systems, for switching a lamp on and off, etc.
JT1
By using the jumpers JM2 or JT2, channel 2 from the receiver can be set up for two output possibilities:
1. Output channel 2 is on while the transmitter is pressed (MOMENT).
JM2
2. Output channel 2 switches (on/off) every time the transmitter is pressed (TOGGLE).
JT2
18. Operating mode