Power led, Diagnostic led, Signal input – Velleman projects PCS10 pcs10 - K8047 User manual User Manual
Page 7: Usb output
Advertising
English
5
PCS10/K8047 © 2003 Velleman Components
1.2.1
power led
Indicates that the unit is correctly connected with the computer
1.2.2
diagnostic led
Lights when the unit is recording data.
1.2.3
Signal input
4 input channels enable you to measure 4 signals at the same time.
1.2.4
USB output
Connect the computer to the USB recorder/logger via the USB cable
Make the connections :
Advertising