Velleman VM134-k8076 - Manual (Page 10)

PicProg2006 helpmanual
9
© 2007 Velleman Components
4.2 Configuration
Consult and modify if necessary the programming options. We recommend executing these
configurations directly in the assembler programme through the "__CONFIG" compiler directive.
See "BLINKLED.ASM" for an example.
Enable or disable the PIC controller options. You can also set them via the __CONFIG compiler
directive in the assembler programme. For more information concerning these options please refer to
the data sheets of the used controller on the Microchip website, viz
www.microchip.com .
5 Use
5.1 Select PIC
1. Choose the correct PIC family on the upper right corner, e.g. "PIC10F", "PIC16F"...
2. Choose the correct type in the adjacent menu, e.g. "PIC10F200"...