Velleman VM134-k8076 - Manual (Page 16)

PicProg2006 helpmanual
15
© 2007 Velleman Components
1. The HEX code that will be saved into the controller.
2. Address counter: indicates where in the memory the device is reading or writing.
3. The ASCII version of the code.
4. Progress bar: Visualize the percentage of the programming or the reading process.
· When the programming process is finished, push the lever of the ZIF socket and remove the
controller.
The controller can irrevocably be damaged if something goes wrong during the
programming process (e.g. connection cut-off, software interrupt van software on the
serial port etc.). For more information please refer to the data sheets of the used controller