Velleman VM134-k8076 - Manual (Page 14)

PicProg2006 helpmanual
13
© 2007 Velleman Components
Before programming the controller, make sure there are no errors in the assembler code (Errors =>
0)
Causes of a communication breakdown:
· PIC controller type does not correspond with the chosen software type
· power supply of the VM134 is too low (15V)
· incorrect PIC selection through patch cables
· defective PIC controller
· PIC controller status cannot be put in program mode
Remark: This PIC programmer will not be able to program controllers which simultaneously use
the internal oscillator and the MCLR pin as input. Programming such a controller can damage it
beyond reuse.
STEP 2: Programming the controller
· Start PICprog2006
· Click the "LOAD HEX FILE" icon. Following screen will appear: