Veris Technologies pH Manager - Operating Instructions User Manual
Page 22
Pub.# OM17-MSP-pH
3-14
Figure 5
Ground speed
(from GPS) in
miles/hour
GPS status: may
read GPS, DGPS,
RTK, or None. If
None, no GPS signal
is received and no
data will be sent out
serial port.
Shallow (Sh) and Deep (Dp) soil EC
readings. If negative, no data will be sent
out serial port. NOTE: FOR pH MAPPING,
SERIAL STRING WITH GPS AND EC
MUST BE SENT TO COMPUTER; USE
EC TEST LOAD TO PROVIDE EC DATA
IF NECESSARY
Point size for EC
values; adjust point
size to fill transects
and display spatial
structure to map.
Ranges used to map pH values. Each color
should have a unique range associated with it.
These are user-defined ranges and can be
changed at any time. If points appear to be
missing from the map, it could be that they are
out of the ranges selected. pH min and pH max
can be used as guidelines for setting up the pH
ranges. Up to five divisions can be selected
These EC ranges
are not user
selectable and are
set by giving each
range the same
number of EC
points.
Colors for the graphs
can be set here, by
clicking on the color
box and selecting a
new color.