V-Tech VT27 Manual - Manual (Page 11)

Memory sharing means that the slave monitors(user code=2/3/4/5,refer to part 9->user
code) can view the pictures from the master monitor(user code=1,refer to part9->user
code),but the master monitor must be with SD card model which has picture memory
function.Touch Memory Playback icon on main menu page.
You can setup Memo Options to choose 1/4/8 pictures memo. If 4/8 was chosen, you
will have 4/8 shots for each recording operation, every 1.5 seconds catch a picture.
Please refer to part 9->Picture Memory.
You can set the maxmum album playing time,range from 1~999 minutes. Please refer
to part 9->Album Playback.
► 4 pictures will be displayed in each memo.
► The newest pictures will be displayed in
the first memo.
► When the built-in memory is full(max.800
pictures),the oldest picture will be deleted to
make room for new record.
8. Album Playback(for SD card model only)
Touch Album on main menu page to play photos(must plug in SD card).it can be
played automatically or manually by using your fingers to slide right or left on screen to
play last or next photo.To finish the ablum playing,please touch the screen and hold for
2 seconds or touch " Menu" key.
Note:the user code of the master monitor must
be set to 1,otherwise the memory function is
unavailable.
About Picture Memory Recording
Playing time setting
-10-
2011-09-13 001 2011-09-13 001 2011-09-13 002
2011-09-13 003 2011-09-13 004
Last
Next
Delete
Home