V-Tech VT27 Manual - Manual (Page 12)

Date and Time Setting
Day Time Setting
Screen Setting
There are two formats for date and time
display, refer to part 9->date/time format.
Touch User Setup ->>Calendar. use
"cancel" key to select the setting item. After
finishing, touch "save" key to perform the
setting.
The day time setting is used to distinguish
the day ring volume and night ring
volume.07:00 AM~18:00 PM is the default
day time .Touch User Setup ->>Day Time.
Use "cancel" key to select the setting item.
After finishing, touch "save" key to perform
the setting.
2011-09-13 16:30
[07:00] --[18:00]
Restore to Default
Touch User Setup ->> Restore to default ,a
message will be asked to confirm the restore
operation. touch Restore to default icon again
,All settings will be restored to default
except Calendar item.
Restore To Default ?
During monitoring or talking state, touch
Adjust icon,the Adjust page will be
displayed.
The first item is Scene mode selection: Total
4 screen modes can be selected in sequence:
Normal, User, Soft and Bright.
The Brightness and Color item is for the
image quality setting.
The Talk Volume item is for talking volume
adjustment.
-11-
Master
Monitor Time Calendar Day Time
Bright
Color
Scene
Talk Vol
Return
Installer Restore
Setup to default
Call tone Call tone Call tone
Slaver Intercom Ring Volume Night Ring
Volume
5