V-Tech VT27 Manual - Manual (Page 15)

-14-
Item Description
Default
value
Remote Control
Used to add the remote controller or delete remote
controller,[0]:delete remote control;[1]:add
remote control.
0
Staircase Light
staircase light can be set.[0]:don't light on at any
time when receive calling;[1]:light on at night
only when receive calling;[2]light on at any time
when receive calling.Note that this item should
be set on master monitor(user code=1),for slave
monitors,this item is invalid.
0
BDU installed
Range from 0~1.when the system install VT-
BDU module,this item must set to 1.
0
Picture Memory
Set the numbers for capture pictures, only
1/4/8 can be set.Note that this item should be
set on master monitor(user code=1),for slave
monitors,this item is invalid.
1
Album Playback
Set the max. playing time for album,range frome
1~999 minutes.
10 mins
Recover Settings...
Restore parameter settings to default value,touch
Recover Settings icon,an information of "Y/
N" will be asked,touch Recover Settings
icon again,restore setting will be performed
immediately. Please note that the recover setting
will not change time format,date format and user
code item.
_
Online Search... Search the devices connected to the system _
Back Return last page _