V-Tech DT24 Manual - Manual (Page 11)

Specification:
• Power Supply: DC 24V
• Power Consumption: Standby 6mA; Working status 194mA
• Monitor Screen: 4 Inch color LCD
• Display Resolutions: 320(R, G, B) x 240 pixels
• Video Signal: 1Vp-p, 75Ω, CCIR standard
• Wiring: 2 wires, non-polarity
• Dimension: 186(H)×190(W)×26(D)mm
Precautions
1) All components should be protected from violence vibration. And not allow
to be impacted, knocked and dropped.
2) Please do the cleanness with soft cotton cloth, please do not use the or-
ganic impregnant or chemical clean agent. If necessary, please use a little
pure water or dilute soap water to clean the dust.
3) Image distortion may occur if the video monitor is mounted too close to
magnetic field e. g. Microwaves, TV, computer etc.
4) Please keep away the monitor from wet, high temperature, dust, caustic
and oxidation gas in order to avoid any unpredictable damage.
5) Must use the right adaptor which is supplied by the manufacturer or ap-
proved by the manufacturer.
6) Pay attention to the high voltage inside the products, please refer service
only to a trained and qualified professional.
-11-