V-Tech DT24 Manual - Manual (Page 5)

Intercom Function
Intercom function can be initiated by any monitor when multi monitors are in-
stalled.
When the monitor is in standby mode, pick up handset, the Intercom item on
main menu page will be selected, press MENU button to enter.
Intercom Call: User in one apartment can call other apartments in the sys-
tem, the namelist will be created automatically by the system. Select a name
on the screen, use / button to move upward / downward to select, then
press MENU button to dial.
Note:
1. Press "MENU " button again to redial.
2.The user code of each monitor must set different
Inner Call: If multi Monitors are installed in the same apartment, select Inner
Call, all the other Monitors will ring at the same time, whichever Monitor an-
• Pick up handset to talk with the visitor, the talking duration time is 90s. To
end the conversation, please hand up the handset. If the system connects
two or more Monitors, pick up any Monitor, the others will be automatically
shut off.
Door Release
During talking state, Press UNLOCK button to open the door for the visitor.
Entrance Monitoring
When the monitor is in standby mode, press MONITOR button(or select Mon-
itor ... item on main menu page), The screen can display the view of outside.
If multi door stations are installed, select Manual Monitor item to enter cam-
era switch mode. Select Camera 1 ... item, the screen will display the image
from the first door camera.Similarly. Select Camera 2 ... item to choose the
second one. Select Camera 3 ... item to choose the third one. Select Camera
4 ... item to choose the fourth one.
To end the monitoring, please tap MONITOR button again.
-5-