V-Tech DT24 Manual - Manual (Page 9)

1
2
How to set the menu language
The monitor can support multi languages and it is so simple and fast, just in-
put the corresponding language code on monitor.The language code number
are as follows:
8101: English
8102: French
8103: Spanish
8104: Italian
8105: German
8106: Dutch
8107: Portuguese
8108: S-Chinese
8109: T-Chinese
8110: Greek
8111: Turkish
8112: Polish
8113: Russian
8114: Slovakia
8115: Hungry
8116: Czech
8117: Hebrew
......
2 locks control:
The monitor can be set to control 2 locks while you should set the unlock2
item to “on “ state.
The code number of 8015 is used to set the unlock2 off that it can only control
one lock.
The code number of 8014 is used to set the unlock2 on that it can control two
locks.
Note:1. During talking or monitoring state,
UNLOCK button,two unlock icons will be
showed. Use / button to select the
item you want, and press UNLOCK or
MENU button to release the correspond-
ing door,select item to exit.
2. Restore to default operation will not
change the parameters setting.
How to set the slave monitor address
Maximum 4 monitors can be connected in one apartment,one master moni-
tor together with 3 slave monitors, so you should set the address correctly.
(note:must have one monitor to be set as master monitor)
The code of 8000 is used to set the master monitor.
The code of 8001 is used to set the first slave monitor .
The code of 8002 is used to set the second slave monitor .
The code of 8003 is used to set the third slave monitor .
-9-