VTech DM221-2 Manual - Manual (Page 19)

12
Using the menu
To enter the parent unit menu:
Press MENU/
BACK
when the parent unit is not in use.
Press or until the screen displays the desired feature. Press SELECT
to enter that feature menu.
Press or until the screen displays the desired option. Press
SELECT
to confirm your selection.
To return to the previous menu, press
MENU
/BACK.
To exit the menu without making any changes, press .
Sensitivity
You can use the parent unit to change the sound sensitivity level of the baby unit
from LEVEL 1 to LEVEL 5. The higher the sound sensitivity level is set, the more
sensitive the baby unit is in detecting sounds for transmitting to the parent units.
The sensitivity level is preset to LEVEL 5.
If you want the baby unit to be very sensitive in detecting sounds, you may set
the sensitivity level to the highest level ( LEVEL 5), so that the baby unit will
always detect any sounds including background noises for transmitting to the
parent units. If you want the baby unit to be less sensitive in detecting sounds,
you may set the sensitivity level to a lower level ( LEVEL 1 to LEVEL 4), so that
the baby unit will transmit sounds to the parent units only when your baby is very
noisy or crying loudly.
To change the sensitivity level of the baby unit:
Press MENU/
BACK
when the parent unit is not in use.
Press SELECT to choose SENSITIVITY.
Press or to scroll through the choices.
Press
SELECT to confirm your selection. The screen displays SAVED and
you hear a confirmation tone.
To enter the sensitivity menu of the parent unit, the baby unit must be
turned on.
1.
2.
3.
•
•
1.
2.
3.
4.
Parent unit settings