Deregister handsets, Appendix – VTech LS6195_-13-15-16-17 Manual User Manual

Page 59

Advertising
background image

Appendix

55

Deregister handsets

If you want to replace a handset, or reassign the designated handset number of

a registered handset, you must deregister all handsets that are registered to the

telephone base. Then register each handset individually.
To make deregistration easier, read all of the instructions on this page before

you begin.
To deregister all handsets:

Press and hold

/FIND HANDSET on the telephone base for about 10 seconds

until the telephone base displays

De-Register?

Immediately press

/FIND HANDSET again. The telephone base displays

Please wait and you hear a confirmation tone.
All handsets alternately show

To register HS... and ...see manual when the

deregistration process completes. The deregistration process takes about

10 seconds to complete.

To register the handset(s) to the telephone base again, follow the registration

instructions on the previous page.

You cannot deregister all handsets if any other system handset is in use.
If deregistration fails, you may need to reset the system and try again. To reset,

unplug the power from the telephone base and plug it back in.
Even if the battery is depleted, you can still deregister all handsets by following

the steps above. After the handset is charged for at least 10 minutes, the handset

alternately shows

To register HS... and ...see manual.

1.

2.

3.


Advertising