VTech LS6195_-13-15-16-17 Manual - Manual (Page 60)

Appendix
56
Screen messages
Call log empty There are no caller ID log entries.
Calling base The handset is calling the telephone base (for intercom calls).
The handset is transferring an outside call to the telephone base.
Calling HS X The handset is calling another system handset.
Contact deleted A directory entry is deleted.
Directory empty There are no directory entries.
Directory full The directory is full. You cannot save any new entries unless you delete
some current entries.
Ended You have just ended a call.
Failed The handset fails to register to the telephone base.
HS X is calling Another system handset is calling (for intercom calls).
Incoming call There is a call coming in.
Intercom The system device is on an intercom call.
Intercom ended The intercom call has just ended.
Intercom to You have started the intercom process, and need to enter the number of
the system deivce you wish to call.
Line in use A system device or another telephone on the same line is in use.
Low battery The handset battery needs to be recharged.
Microphone on The mute function is turned off and the other party can hear you.
Muted The microphone is off. The other party cannot hear you.
New voicemail There are new voicemail messages from your telephone
service provider.
No battery The handset in the telephone base or handset charger has no
battery installed.
No line There is no telephone line connection.
Not available Someone else is using the directory, caller ID log, or answering system.
Number repeated The telephone number you have entered is already in the directory.
Out of range or
no pwr at base The telephone base has lost power, or the handset is out of range.
Phone The handset/telephone base is on a call.
Put in charger The battery is very low. Put the handset in the telephone base for
recharging.