Caller id information, Intercom, Multiple handset use – VTech IS7121_-2-22 Manual User Manual
Page 56
51
Multiple handset use
Intercom
Use the intercom feature for conversations between two system handsets.
This feature is only applicable to models with more than one handset.
Press
INTCOM
on the handset when not in use.
-OR-
Press
MENU
on the handset when not in use. Press q or p
to scroll to
Intercom, then press
SELECT
.
If your system has two handsets, your handset displays
Calling other handset. The destination handset displays
Other handset is calling.
If your system has more than two handsets, the handset
displays
INTERCOM TO: and a list of registered handsets.
Press q or p to scroll to the destination handset and
then press
SELECT
.
-OR-
Use the dialing keys to enter the destination device
number (
1 to 9 for HANDSET 1 to HANDSET 9,
and
0 for HANDSET 10, or
and
for
All handsets).
Your handset displays
Calling HANDSET X, or Calling
all handsets if you choose All handsets. The destination
handset displays
HANDSET X is calling.
To answer the intercom call, press , or any dialing key
(
0-9,
or
) on the destination handset. Both handsets
now show
Intercom.
To end the intercom, press
OFF or
END
on the handset or
place the handset back in the telephone base or charger. Both
devices display
Intercom ended.
You can cancel the intercom call before it is answered by
pressing
OFF or
END
.
If the destination device does not answer the intercom
call within 100 seconds, or if it is out of range, on a call, or
accessing the answering system, your handset displays
No
answer. Try again. and then returns to idle mode.
You can press
MUTE or
SILENCE
on the destination handset
to temporarily silence the intercom ringer.
Only one pair of intercom call can be established at a time.
When a pair of handsets is using intercom, you are not able to
perform video streaming using other handset(s) until the intercom ends.
1.
•
•
◊
◊
2.
3.
•
•
•
•
•
Calling
HANDSET 1
END
INTERCOM TO:
HANDSET 1
HANDSET 2
All handsets
BACK
SELECT
HANDSET 1
HANDSET 3
is calling
SILENCE
Interco m
1:35am 8/20
EQ
END