VEGA PLICSMOBILE T61 - Manual (Page 24)

24
7 Setup
PLICSMOBILE T61 • External GSM/GPRS radio unit
37700-EN-130228
ment functions. The system requirements for operation correspond to
those of the "DTM Collection" or of PACTware.
During installation of the "DTM Collection", the appropriate instrument
driver is installed automatically. When PLICSMOBILE T61 is con-
nected, the driver installation is completed autonomously and is ready
for operation without a restart.
1
3
2
Fig. 11: Connection of the PC via USB
1 USB interface of the PC
2 Mini-USB connection cable (in the scope of delivery)
3 USB interface of PLICSMOBILE T61
7.3 Parameter adjustment with PACTware
For adjustment via PC, the configuration software PACTware and
a suitable instrument driver (DTM) according to FDT standard are
required. The up-to-date PACTware version as well as all available
DTMs are compiled in a DTM Collection. The DTMs can also be inte-
grated in other frame applications according to FDT standard.
Note:
To ensure that all instrument functions are supported, you should
always use the latest DTM Collection. Furthermore, not all described
functions are included in older firmware versions. You can download
the latest instrument software from our homepage. A description of
the update procedure is also available in the Internet.
The basic operation of the software is described in the operating
instructions manual "DTM Collection/PACTware" attached to each
DTM Collection and which can also be downloaded from the Internet.
Detailed descriptions are available in the online help of PACTware and
the DTMs.
All device DTMs are available as a free-of-charge standard version
and as a full version that must be purchased. In the standard version,
all functions for complete setup are already included. An assistant for
simple project configuration simplifies the adjustment considerably.
Saving/printing the project as well as import/export functions are also
part of the standard version.
In the full version there is also an extended print function for complete
project documentation as well as a save function for measured value
and echo curves. In addition, there is a tank calculation program as
well as a multiviewer for display and analysis of the saved measured
value and echo curves.
Prerequisites
Standard/Full version