VEGA VEGADIF 65 4 … 20 mA_HART - Manual (Page 54)

54
6 Adjustment with the display and adjustment module PLICSCOM
VEGADIF 65 • 4 … 20 mA/HART
36128-EN-130417
Menu section Menu item Reset value
Basic settings Zero/Min. adjustment Measuring range begin
Span/Max. adjustment Measuring range end
Density 1 kg/l
Density unit kg/l
Damping 1 s
Linearization Linear
Sensor-TAG Sensor
Display Displayed value Differential pressure
Display unit Mass/kg
Scaling 0.00 to 100.0
Decimal point indication 8888.8
Diagnostics Totalizer 0.0000 10 00 gal
Part sum counter 0.0000 10 00 gal
Service Current output - charac-
teristics
4 … 20 mA
Current output - failure
mode
< 3.6 mA
Current output - min.
current
3.8 mA
Current output - max.
current
20.5 mA
The values of the following menu items are not reset with "Reset:
Menu section Menu item Reset value
Basic settings Unit of measurement bar
Temperature unit °C
Position correction No reset
Display Backlight No reset
Service Language No reset
HART mode No reset
Applications No reset
Peak value
The min. and max. temperature or pressure values are each reset to
the actual value.
Totalizer
The total and part sum counter are reset to zero.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following
menu schematic. You will find a detailed description of these menu
items in the operating instructions manual "Display and adjustment
module".
Optional settings