VEGA LUCOM EDGE router ER75i v2 SL USER’S GUIDE - Manual (Page 11)

EXPANSION PORT MOUNTING
11
2.8. User interfaces (Connectors)
On the front and back panel of router the following connectors are located
•
one MRT 2pin connector (PWR) – for connection of the power supply adapter
•
one RJ45 connector (ETH) – for connection into the local equipment
•
one RJ45 connector (optional PORT1) – for connection of the local any arrangement over
RS232, RS485/422, ETHERNET, M-BUSD or CNT
•
one RJ45 connector (optional PORT2) – for connection of the local any arrangement over
RS232, RS485/422, M-BUSD
•
one FME or SMA connector (ANT) – for connection of the antenna
•
one USB-A Host connector (USB) – for connection of the devices to the router, USB
supports equipments with PL-2303 and FTDI USB/RS232 converter
•
One MRT 3pin connector (I/O) – for connection of the binary input and output
Front panel ER75i v2 SL.
Front panel ER75i v2.
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de