Atdec Telehook TH-VA-2X2-SHARPV6012 Installation manual User Manual
Page 4
Rev.01-08/11
Figure 7
Figure 6
Servicing Tips
Right Column Monitor Removal:
Reach fingers between the wall and the right monitor
and lift the locking arm (Figure 7). Slide and pull
monitor to the right (about 3/4” ) until its button fittings
disengage from the frame, then remove.
Left Column Monitor Removal:
Reach fingers between the wall and the left monitor
and lift the locking arm. Slide and pull monitor to the
left (about 3/4”) until its button fittings disengage from
the frame, then remove.
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without noticed. Published 04.12.12 ©