Adjustment capability – Milton CAT D100-6_S 100 kW Automatic Voltage Regulator R438 User Manual

Page 2

Advertising
background image

Information contained in this publication may be considered confidential.

www.cat-ElectricPower.com

Market: N. America

Discretion is recommended when distributing.

Materials and specifications are subject to change without notice.

© 2006 Caterpillar

LEHE4006-00 (01-06)

CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product

All Rights Reserved.

identity used herein, are trademarks of Caterpillar and may not be used without permission.

Printed in U.S.A.

G E N E R A T O R S

ADJUSTMENT CAPABILITY:

Potentiometer P1 – Quadrature Droop
Adjustment

Potentiometer P2 – Voltage Adjustment

Potentiometer P3 – Stability Adjustment

Potentiometer P4 – Underspeed/LAM
Threshold Adjustment

Potentiometer P5 – Excitation ceiling

Link ST1 – Link IN for single phase voltage
detection (standard)

Link ST2 – Link IN for Normal response time
or CUT for Rapid response time

Strap ST3 – Strap between middle and left
terminal for 50 Hz or between middle and right
terminal for 60 Hz

Strap ST4 – Strap IN for no remote voltage
adjustment or OUT and potentiometer (470

,

0.5W min., adjustment range ± 5%) connected
to the terminals for remote voltage adjustment

Link ST5 – Link IN for LAM or CUT to
disable LAM

Link ST9 – Link IN for AREP or CUT for PMG

Advertising